Frequently asked questions about the CS water hose

A CS soaker hose is an irrigation hose designed for efficient water distribution in the garden. Fine water droplets seep through small pores in the hose and slowly reach the roots of plants. This reduces evaporation and distributes moisture evenly throughout the soil.

For rain barrels and pressureless systems, Pressureless is the right choice. Startup is suitable as an affordable entry level solution. For higher expectations in home gardens, we recommend Premium. For large areas and long distances, Professional is the high performance solution.

The CS soaker hose is especially suitable for vegetable beds, garden beds, raised beds, greenhouses, borders, hedges, lawns and many other planted areas. The Pressureless version is also ideal wherever there is little water pressure or no direct water connection.

The CS soaker hose is ideal for vegetable beds, raised beds, hedges, shrubs, fruit and berries, flower beds and greenhouses. It is especially useful wherever consistent soil moisture is important.

Compared with traditional sprinkler systems, the CS soaker hose irrigates much more precisely in the root zone. This reduces water consumption, prevents overwatering and provides a more even water supply to plants.

Water consumption depends on the model, length and irrigation duration. The CS Startup, Premium and Professional soaker hoses release approximately 6 to 8 liters per meter per hour. The Pressureless version releases approximately 8 to 10 liters per meter per hour. Example: 7 liters per hour × 10 meters of Premium soaker hose with a watering duration of 20 minutes results in approximately 23 liters of water consumption.

The CS soaker hose can significantly reduce water consumption because water is delivered directly to the roots. This can also save costs over the long term. In addition, leaves and plant surfaces remain drier, which may reduce diseases and pest pressure.

The CS soaker hose is manufactured in Germany and is a genuine Made in Germany product.

The CS soaker hose is manufactured from recycled materials. Recycled tires and polyethylene are used in the production process.

No, the CS soaker hose does not release harmful substances. This is regularly monitored by independent testing institutions. The results to date show no release of harmful substances.

Yes, but for pressurized systems only when used with a water filter and a suitable pressure reducer. The Pressureless version must not be connected directly to a faucet or pump and should only be operated from filled water containers.

The maximum length per line depends on the version. Pressureless up to 25 meters, Startup up to 50 meters, Premium up to 75 meters and Professional up to 100 meters. For larger projects, we recommend multiple circuits or a proper division into separate lines.

A pressure reducer lowers the water pressure from the mains supply to a level suitable for the CS soaker hose. Excessive pressure can damage the fine pores and negatively affect performance and service life. The pressure reducer ensures the correct operating pressure and supports even water distribution.

A pressure reducer lowers the water pressure in the line to a level suitable for the CS soaker hose. Flow reduction, on the other hand, reduces the amount of water flowing through the system. From approximately 30 meters of installed CS soaker hose, a pressure reducer should be used instead of simple flow reduction. Up to 50 meters, a combination of a pressure reducer and flow reduction can be beneficial.

Suitable pumps are those that provide a steady and relatively low pressure. It is important that the pump either works with an expansion tank, supplies additional water during irrigation, or that a second circuit is installed to return part of the water. This helps prevent the pump from overheating.

In many cases, yes. Pressure reducers protect the hose in pressurized systems, control valves help fine tune individual areas and connectors allow clean adaptation to garden beds, hedges or branched garden layouts.

Yes, a water filter is strongly recommended. It protects the fine pores of the soaker hose from clogging caused by dirt, sediment and suspended particles. This increases service life and ensures more consistent water output.

Yes, the CS soaker hose can be installed above ground. It should ideally be covered with bark mulch or a similar material. In general, however, we recommend burying the soaker hose or placing it beneath a mulch layer whenever possible.

Installation below ground or beneath a mulch layer is ideal. Avoid sharp bends and plan the pipe layout as neatly as possible. This helps maintain even water flow and provides better protection against external influences.

Above ground installation is quick and easy, but water loss through evaporation increases and deposits are more likely to build up in the pores. Underground installation or installation beneath mulch is more efficient because water reaches the roots more directly and the soaker hose is better protected.

The optimal irrigation duration depends on plant type, soil conditions and weather. As a general guideline, vegetable gardens often require 20 to 30 minutes, 3 to 4 times per week. Flowers and ornamental plants typically require 10 to 20 minutes. Hedges, trees and lawns usually require 25 to 30 minutes. The actual soil moisture level is always the deciding factor. Ideally, irrigation should be carried out in the morning or late evening.

The connectors are easier to install if lightly coated with a small amount of cooking oil. It is important to push the connectors into the soaker hose without twisting them so that the edges do not damage the material.

The CS soaker hose itself is frost resistant and can often remain installed during winter because it drains itself through its fine pores. However, accessories such as water filters, pressure reducers, irrigation controllers and other components that can retain water should be removed and stored in a frost free location.

In areas with hard water, it is especially important to bury the CS soaker hose or place it beneath mulch. If it remains above ground in direct sunlight, it dries out more quickly and limescale can accumulate more easily in the fine pores. If you are unsure, it is advisable to start with a smaller hose roll as a test.

For a long service life, use clean water with a water filter, drain the system before winter, store accessories in a frost free location and regularly inspect the lines for deposits, contamination and leaks.

Service life depends mainly on water quality, correct pressure, proper installation, limescale exposure and winter maintenance. Using a water filter, a suitable pressure reducer and a protected installation method can significantly improve durability.