CS Professional Soaker Hose for Long Runs and Large Garden Areas
The CS Professional Soaker Hose is intended for longer hedges, planting rows, lawns and larger garden areas. Its porous hose wall releases water into the soil along the installed length. With a suitable water supply, this product line can support particularly long irrigation runs.
- Up to 100 m per straight run
- For larger garden areas
- Above or below ground
For Larger Irrigation Projects
The Professional version supports targeted irrigation of longer planting areas when suitable water pressure and flow are available.
- Long hedges and planting rows
- Larger garden beds and landscaped areas
- Lawn irrigation with suitable below-ground installation
Adaptable Installation and Separate Runs
We recommend installation in the soil near the root zones. The appropriate depth depends on the plants and soil conditions. Above-ground installation is also possible, in which case cover the hose with soil or bark mulch.
The hose can be cut to length. Suitable connectors can be used for multiple runs, but the overall hydraulic supply must be considered.
Important Planning Information
-
Run length: Straight irrigation runs of up to 100 metres each are possible under suitable conditions. This requires an adequately sized water supply.
-
Fixed flow restriction: From 30 metres, a fixed restrictor may supply too little water and cause uneven discharge. Plan longer runs without an additional fixed restriction.
-
Operating pressure: The intended operating pressure is 0.69 bar. The maximum permitted inlet pressure is 1.5 bar, not a recommended operating target. An appropriate pressure reducer helps maintain the correct pressure.
-
Water quality: For rainwater, cistern water and well water, we recommend a 60 µm filter, optionally followed by a 20 µm filter if needed. Ensure adequate water flow.
-
System planning: Internal diameter approximately 13 mm. Connectors and water supply must suit the total length and number of runs operating simultaneously.
Product safety information
Manufacturer information:
CS Bewässerungssysteme GmbH
In der Aue 29
Hessen
Reichelsheim, Deutschland, 64385
info@cs-wss.com
www.cs-wss.com
Responsible person:
CS Bewässerungssysteme GmbH
In der Aue 29
Hessen
Reichelsheim, Deutschland, 64385
info@cs-wss.com
https://cs-wss.com/
| Item information |
Value |
| Shipping weight: |
1,25 kg
|
| Item weight: |
1,26 kg
|
Technical Specifications
| Product line |
CS Soaker Hose Profi |
| Inner diameter |
13 mm |
| Wall thickness |
2.7 mm |
| Operating pressure |
0.69 bar |
| Maximum permissible inlet pressure |
1.5 bar |
| Maximum straight irrigation run length |
100 metres |
| Recommended maximum run length for winding or circular layouts |
15 metres |
| Water discharge |
6 to 8 litres per metre per hour when buried, under suitable operating conditions |
| Material |
Recycled tyre granulate and recycled polyethylene |
| Colour |
Black |
| Installation |
Above ground or underground, generally close to the root zone |
| Country of manufacture |
Germany |
Note: Actual water discharge depends on operating pressure, available water flow, hose length, soil conditions and installation. The stated values are not a guaranteed discharge rate for every installation.
Application Notes
Water Supply and Connections
- Use clean, appropriately filtered water with the CS Professional Soaker Hose.
- Use suitable connectors for the hose with an approximate 13 mm internal diameter and compatible connections to the 1/2 inch garden hose quick-connect system.
- The intended operating pressure is 0.69 bar. The maximum permitted inlet pressure is 1.5 bar; this is not a recommended operating setting.
- For higher supply pressures, use a suitable pressure reducer. A fixed flow restrictor alone cannot reliably control pressure.
- For rainwater, cistern water or well water, use a 60 µm filter. An additional 20 µm filter may be useful if required. The included 125 µm filter traps coarser particles. Check all filters for adequate flow and clean them regularly.
- For long runs or multiple runs, the water supply must provide enough flow for the entire installation.
Installation and Irrigation Runs
- Install the hose near the root zones where practical. A suitable below-ground installation is particularly useful for lawn irrigation; installation depth depends on the plants and soil.
- Above-ground installation is also possible. Cover exposed hose with soil or bark mulch.
- Straight irrigation runs of up to 100 metres each are possible with suitable water supply.
- A fixed flow restrictor may allow too little water into runs of 30 metres or more and cause uneven discharge. Plan longer runs with suitable pressure control and without an additional fixed restriction.
- For larger systems with multiple runs, consider total water demand and check water discharge along each entire run.
Care and Winter Storage
- Inspect and clean filters regularly.
- At the beginning of the season, flush the supply line with the soaker hose disconnected.
- Before freezing weather, close the water supply and drain the system where possible; drain and store frost-sensitive components in a frost-free place according to their manufacturer instructions.
Material and Odour
The CS Professional Soaker Hose contains tyre granulate and polyethylene, among other materials. Newly manufactured hoses may have a characteristic odour that diminishes over time.
There are no reviews yet.