CS Startup Soaker Hose for Cost-Conscious Garden Irrigation
The CS Startup Soaker Hose is an economical introduction to targeted irrigation of vegetable beds, flower beds, herb gardens and planting rows. Its porous hose wall slowly releases water into the soil. Suitable placement near the roots helps supply plants according to their needs.
- Up to 50 m per straight run
- Above or below ground
- Can be cut to length
For Garden Beds and Planting Rows
The Startup version is suitable for small and medium-sized garden projects and can be routed along the required planting areas.
- Vegetable beds, flower beds and raised beds
- Herb gardens, greenhouses
- Flexible lengths through cutting to size
Easy Installation and Expansion
We recommend installing the hose near the plants’ root zones. It can be used above or below ground. For above-ground use, cover the hose with soil or bark mulch.
Suitable connectors can be used to assemble separate irrigation runs. Connectors must match the Startup hose dimensions.
Important Planning Information
-
Run length: Straight irrigation runs of up to 50 metres each are possible under suitable operating conditions. Divide longer total lengths into separate runs.
-
Fixed flow restriction: From 30 metres, an additional fixed restriction may reduce water flow too much and cause uneven discharge. For longer runs, provide a suitable pressure reducer and sufficient water flow.
-
Pressure control: The maximum permitted inlet pressure is 1.5 bar. This is not a recommended operating setting. A fixed flow restrictor alone is not a substitute for an appropriate pressure reducer.
-
Water quality: For rainwater, cistern water and well water, we recommend a 60 µm filter, with an optional additional 20 µm filter if needed. Choose and clean filters to maintain sufficient flow.
-
Suitable components: The Startup hose has an internal diameter of approximately 12 mm. Connectors for other CS lines are not automatically interchangeable.
Product safety information
Manufacturer information:
CS Bewässerungssysteme GmbH
In der Aue 29
Hessen
Reichelsheim, Deutschland, 64385
info@cs-wss.com
www.cs-wss.com
Responsible person:
CS Bewässerungssysteme GmbH
In der Aue 29
Hessen
Reichelsheim, Deutschland, 64385
info@cs-wss.com
https://cs-wss.com/
| Item information |
Value |
| Shipping weight: |
5,33 kg
|
| Item weight: |
5,34 kg
|
Technical Specifications
| Product line |
CS Soaker Hose Startup |
| Inner diameter |
12 mm |
| Wall thickness |
2.3 mm |
| Operating pressure |
0.69 bar |
| Maximum permissible inlet pressure |
1.5 bar |
| Maximum straight irrigation run length |
50 metres |
| Recommended maximum run length for winding or circular layouts |
15 metres |
| Water discharge |
6 to 8 litres per metre per hour when buried, under suitable operating conditions |
| Material |
Recycled tyre granulate and recycled polyethylene |
| Colour |
Black |
| Installation |
Above ground or underground, generally close to the root zone |
| Country of manufacture |
Germany |
Note: Actual water discharge depends on operating pressure, available water flow, hose length, soil conditions and installation. The stated values are not a guaranteed discharge rate for every installation.
Application Notes
Water Supply and Connections
- Use clean, suitably filtered water with the CS Startup Soaker Hose.
- Use connectors specifically suited to the Startup version and common 1/2 inch garden hose quick-connect systems; the soaker hose has an internal diameter of approximately 12 mm.
- The maximum permitted inlet pressure is 1.5 bar, which is not a recommended operating setting. A fixed flow restrictor alone is not a substitute for a pressure reducer.
- For rainwater, cistern water or well water, use a 60 µm filter; an additional 20 µm filter may help, depending on water quality. The included 125 µm filter traps coarser particles. Clean finer filters regularly and ensure sufficient flow.
- An irrigation controller must be compatible with the actual available pressure and flow.
Installation and Irrigation Runs
- Install the hose near the plants’ roots where practical. Above-ground and below-ground installation are possible, with depth determined by the plants and soil.
- Cover exposed hose with soil or bark mulch where practical.
- Straight irrigation runs of up to 50 metres are possible under suitable conditions.
- A fixed flow restrictor can excessively limit water supply for runs of 30 metres or more. Plan longer runs using a suitable pressure reducer without an additional fixed restriction and with sufficient flow.
- When operating multiple runs, consider total water demand and check discharge along each run after installation.
Care and Winter Storage
- Inspect and clean filters regularly.
- Flush the supply hose with the soaker hose disconnected at the start of the season.
- Before freezing weather, close the water supply and drain the system where possible; store sensitive parts such as filters, pressure reducers and irrigation controllers in a frost-free location according to the manufacturer’s instructions.
Material and Odour
The CS Startup Soaker Hose contains tyre granulate and polyethylene, among other materials. New hoses may have a characteristic rubber-like odour that diminishes over time.
There are no reviews yet.