Skip to main content Skip to search Skip to navigation

Soaker Hoses & Sets

CS Premium Soaker Hose: Soaker Hoses & Irrigation Sets

Water garden beds, raised beds, greenhouses, hedges and planting rows with the CS Premium Soaker Hose. This category includes individual soaker hoses in various lengths and irrigation sets with suitable connection fittings. Choose the appropriate configuration for your garden and match the hose length, water supply and accessories to your irrigation requirements.

  • Various hose lengths and irrigation sets
  • Available with or without suitable fittings
  • 1/2 inch, approximately 13.0 mm internal diameter
  • Maximum 75 m per straight irrigation run

Important information for irrigation planning

The CS Premium Soaker Hose is designed for a regulated water pressure supply. The recommended operating pressure is 0.69 bar. The maximum permissible water pressure of 1.5 bar must not be exceeded and should not be confused with the recommended operating pressure. For straight installation, the maximum hose length is 75 metres per irrigation run. Larger total hose lengths may require several suitable irrigation runs. Ensure sufficient water flow, appropriate pressure regulation and suitable water filtration. For gravity-fed irrigation from a water butt without mains water pressure, consider the CS Pressureless Soaker Hose.

Connection options, technical features and application tips

Choosing the right configuration

  • Without accessories: Suitable if compatible fittings are already available or if you wish to assemble your irrigation system individually.
  • With quick hose connector and end plug: For connection to a compatible click-fit system and closing the end of the hose.
  • With flow-reducing quick hose connector: Limits the supplied water flow according to the selected product configuration. A flow reducer does not replace a pressure regulator where one is required.
  • With flow-reducing regulating valve: Allows the water supply to be adjusted at the irrigation run. Observe the applicable operating pressure requirements.
  • Irrigation sets: Depending on the selected product, additional fittings or other components may be included. Please check the specified package contents.

Technical features and applications

  • Hose dimensions: Internal diameter approximately 13.0 mm and wall thickness approximately 2.5 mm. Use compatible connection fittings.
  • Irrigation length: A maximum of 75 metres per irrigation run is intended for straight installation. The total hose length of a set may be distributed across several irrigation runs.
  • Targeted water distribution: Water seeps through the porous hose wall and enters the soil around the plant roots.
  • Above-ground and underground installation: Both installation methods are possible. For above-ground use, covering the hose with soil or bark mulch is recommended.
  • Pressure regulator and water filter: A suitable pressure regulator limits water pressure. A water filter retains dirt particles and may reduce the risk of blockages.

Water supply information: Suitable operating pressure and sufficient water flow are equally important. Consider hose length, the number of irrigation runs, possible height differences and the available flow rate.

Installation tip: Check the contents of the selected product and use compatible connectors. Flow-reducing fittings limit the water supply but do not replace a pressure regulator where one is required. Follow the installation instructions for the relevant product.

Maintenance and frost protection: Check the water supply regularly and clean installed filters when necessary. Drain accessories that are sensitive to frost, including water filters, pressure regulators and irrigation controllers, before winter and store them in a frost-free location.



Items 1 - 30 of 41