CS Premium Soaker Hose: Configure Your Irrigation System
The CS Premium Soaker Hose is suitable for targeted irrigation of vegetable beds, raised beds, flower beds, hedges and greenhouses, close to the plants' roots. Its porous hose wall slowly releases water into the surrounding soil. Use the configurator to select suitable connection parts and, if required, additional accessories for your garden irrigation system.
- Configure to suit your garden
- Up to 75 m per straight irrigation run
- Above-ground or underground installation
Deliver Water Close to the Roots
The CS Premium Soaker Hose can be placed along garden beds, planting rows and hedges. Water passes through the hose wall into the soil, where moisture distribution depends on soil conditions. Installing the hose close to the root zone helps deliver water where plants need it.
- For vegetable beds, raised beds, greenhouses and flower beds
- For hedges, borders and longer planting rows
- Cover above-ground hose runs with soil or bark mulch where practical
How to Use the Configurator
The hose length is determined by the selected product. Choose further components to suit your water source and installation layout:
-
Connection type: select suitable connectors or accessory sets
-
Water supply: choose appropriate pressure reduction or flow control for the planned run length
-
Water filters and irrigation timers: add these as needed for filtration and scheduled watering
-
Garden hose and ground stakes: add these as needed for the supply line and secure positioning
The actual items included and the total price depend on the options you select.
Important Planning and Operating Information
-
Water pressure: The intended operating pressure is 0.69 bar. The maximum permitted pressure at the soaker hose inlet is 1.5 bar; this is a limit, not the recommended operating pressure. Use a suitable pressure reducer if the supply pressure is higher.
-
Flow restriction: A fixed flow restrictor is not a substitute for a pressure reducer. For runs 30 metres or longer, it may restrict the incoming water too much and cause uneven water discharge. Longer runs require sufficient water flow and appropriate pressure regulation.
-
Run length: With a suitable water supply, straight irrigation runs can be up to 75 metres long. For serpentine or circular layouts, we recommend a maximum of 15 metres per run. Divide longer hose rolls into separate runs as needed.
-
Water quality: Use clean, suitably filtered water. For rainwater, cistern water or well water, we recommend at least a 60 µm water filter and, depending on water quality, an additional 20 µm filter. A 125 µm filter catches larger particles but does not replace the recommended finer filtration for these water sources. Clean filters regularly and ensure sufficient water flow.
Product safety information
Manufacturer information:
CS Bewässerungssysteme GmbH
In der Aue 29
Hessen
Reichelsheim, Deutschland, 64385
info@cs-wss.com
www.cs-wss.com
Responsible person:
CS Bewässerungssysteme GmbH
In der Aue 29
Hessen
Reichelsheim, Deutschland, 64385
info@cs-wss.com
https://cs-wss.com/
| Item information |
Value |
| Shipping weight: |
5,44 kg
|
| Item weight: |
5,45 kg
|
Technical Specifications
| Product line |
CS Soaker Hose Premium |
| Inner diameter |
13 mm |
| Wall thickness |
2.5 mm |
| Operating pressure |
0.69 bar |
| Maximum permissible inlet pressure |
1.5 bar |
| Maximum straight irrigation run length |
75 metres |
| Recommended maximum run length for winding or circular layouts |
15 metres |
| Water discharge |
6 to 8 litres per metre per hour when buried, under suitable operating conditions |
| Material |
Recycled tyre granulate and recycled polyethylene |
| Colour |
Black |
| Installation |
Above ground or underground, generally close to the root zone |
| Country of manufacture |
Germany |
Note: Actual water discharge depends on operating pressure, available water flow, hose length, soil conditions and installation. The stated values are not a guaranteed discharge rate for every installation.
Application and Installation Instructions
Water Supply and Connections
- Use the CS Soaker Hose Premium only with clean, suitably filtered water.
- Use suitable, matching connectors to attach the soaker hose to common 1/2 inch garden hose quick connect systems.
- The intended operating pressure is 0.69 bar. The maximum permissible inlet pressure at the soaker hose is 1.5 bar; this is not the recommended operating pressure.
- Use a suitable pressure reducer when the supply pressure is too high. A fixed flow restrictor alone does not replace pressure regulation.
- In addition to suitable pressure, the available water flow must be sufficient for the entire irrigation system.
- When using rainwater, water from cisterns or well water, install a 60 µm water filter. Depending on water quality, an additional finer 20 µm filter may be useful. Check and clean filters regularly. Fine filtration must not restrict the water supply excessively.
- A 125 µm water filter, as included in some complete sets, retains coarser particles and does not replace the recommended finer filtration for these water sources.
Installation and Irrigation Runs
- Generally position the soaker hose close to the root zone. Above ground and underground installation are both possible; the appropriate depth depends on the crops and soil conditions.
- For above ground installation, we recommend covering the hose with soil, bark mulch or similar material.
- For straight installation, irrigation runs of up to 75 metres per run are possible under suitable operating conditions.
- For winding or circular layouts, we recommend a maximum of 15 metres per irrigation run.
- For irrigation runs of 30 metres or more, a fixed flow restrictor may limit the incoming water supply too much and cause uneven discharge. For longer runs, plan the supply using a suitable pressure reducer and sufficient flow.
- When several runs operate at the same time, the supply pressure and available flow must be sufficient for all runs together. Check water discharge along the entire hose length after installation.
Care and Winter Storage
- Inspect water filters regularly and clean them as needed to maintain sufficient water flow.
- Before the irrigation season, flush the supply line while the soaker hose is disconnected to remove possible deposits.
- The soaker hose may remain in the ground over winter. Shut off the water supply before freezing weather and drain the system as far as possible.
- Drain and store frost-sensitive components, including water filters, pressure reducers and irrigation controllers, in a frost-free location according to the relevant manufacturer instructions.
Material and Odour
CS Soaker Hoses are made partly from recycled tyre granulate. Newly manufactured hoses may therefore have a mild, tyre-like odour. This is related to the material and normally decreases over time.
There are no reviews yet.