Skip to main content Skip to search Skip to navigation

Soaker Hoses & Sets

CS Pressureless Soaker Hose: Soaker Hoses & Irrigation Sets

Water garden beds, hedges and planting rows efficiently using rainwater from a water butt or storage tank. This category includes CS Pressureless Soaker Hoses in various lengths and suitable irrigation sets. The system operates by gravity and does not require conventional mains water pressure. Choose the appropriate configuration for your garden irrigation needs.

  • Suitable for water butts and storage tanks
  • Gravity-fed operation without mains water pressure
  • Maximum 25 m per straight irrigation run
  • Individual soaker hoses and accessory sets

Important information for irrigation planning

The CS Pressureless Soaker Hose is designed for irrigation using low water pressure supplied by an elevated water container. A water head of approximately 20 to 50 cm is recommended. For straight installation, the maximum hose length is 25 metres per irrigation run. With a suitable circular layout, up to 50 metres of actual hose length may be installed. In this configuration, water is supplied at one end only, while the other end is closed. Therefore, a set with a greater total hose length does not mean that the entire length can be operated as one straight irrigation run.

Technical features, applications and installation guidance

Features and applications

  • Targeted irrigation: The soaker hose releases water along its surface and is particularly suitable for garden beds, hedges and planting rows.
  • Rainwater irrigation: Water can be supplied from a water butt or suitable storage tank positioned sufficiently above the hose.
  • Flexible product selection: Individual soaker hoses and irrigation sets are available in different lengths and configurations. Please check the contents of each product.
  • Gravity-fed system: The Pressureless system is designed for low-pressure operation. Direct connection to a pressurised water supply or pump without suitable pressure regulation is not intended.

Water filtration and installation

  • Clean irrigation water: Use clean rainwater or filtered water whenever possible to reduce dirt entering the system and the risk of blockages.
  • Suitable water filter: A filter designed for gravity-fed operation can help retain dirt particles. Ensure that sufficient water flow is maintained even at low operating pressure.
  • Water flow adjustment: Suitable regulating valves allow the water supply to be adjusted to the irrigation requirements.
  • Connection to water containers: Use compatible tank connectors, hose fittings and shut-off valves. Follow the specifications for connection sizes and required drilling diameters provided with the relevant accessories.

Installation guidance: Arrange the hose according to the areas that require irrigation. On sloping ground or where height differences occur, additional flow regulation for individual sections may be beneficial.

Maintenance and frost protection: Check the water supply regularly and clean installed filters when necessary. Drain accessories that are sensitive to frost before winter and store them in a frost-free location.



Items 1 - 10 of 25