Shut-off Valve with Rubber Grommet
This shut-off valve with rubber grommet is ideal for the installation of CS Soaker hose Premium, Profi, and CS Soaker hose pressureless. It offers various applications, especially for the irrigation of all kinds of plants.
For Drilling into:
- Rain barrel
- PE pipe
- Storage container
- Water tank (without pump)
Applications without Water Pressure (Pressureless):
Example Application Rain Barrel/Water Tank/Storage Container:
The CS Soaker hose Pressureless is laid either above or preferably underground. A hole is drilled into the container with a suitable drill bit (16mm). Then, the rubber grommet is pressed into the drilled hole, followed by the shut-off valve. The rubber grommet seals the hole. The CS Soaker hose Pressureless is mounted on the other end. Maximum installation length: up to 25 meters per straight strand. For larger areas, multiple containers or connections are recommended.
Recommendation:
The storage tank should be placed approximately 30 - 50 cm higher than the CS Soaker hose Pressureless.
Example Application PE Pipe:
The PE pipe is laid along the area to be irrigated. The water extraction points are made with a suitable drill bit (16mm). The rubber grommet is pressed into the drilled hole, followed by the shut-off valve. The CS Soaker hose Pressureless is mounted on the other end. Maximum installation length: up to 25 meters per straight strand. The diameter of the PE pipe should be at least DN32. The more CS Soaker hoses are connected, the larger the PE pipe diameter should be.
Applications with Pressure (Premium and Profi):
Example Application Operating with Water Pressure:
The PE pipe is laid along the area to be irrigated. The water extraction points are made with a suitable drill bit (16mm). The rubber grommets and shut-off valve seal the hole. The CS Soaker hose is mounted on the other end at the desired length. The maximum CS Soaker hose length per straight strand is up to 75 meters (Premium) and 100 meters (Profi). The recommended diameter of the PE pipe should be at least DN32. Water pressure is reduced to approximately 0.5 - 1.5 bar using a pressure reducer.
Additional Accessories:
In our shop, you will find a wide range of additional accessories such as elbow connectors, couplings, end caps, faucet connectors, click connectors, shut-off valves, pressure reducers, and more.
Technical Data:
- Material: Plastic
- Compatibility: Suitable for CS Soaker hose with a diameter of 1/2 inch
- Drill Size: Requires a 16mm drill bit for drilling
- Connection Size: 16mm
