Skip to main content Skip to search Skip to navigation

Pressure reducer

Pressure Reducers and Flow Restrictors for CS Soaker Hose

Choose suitable pressure regulators and flow restrictors for your CS Soaker Hose system. Pressure reducers lower the water pressure, while flow restrictors limit the incoming water flow. Select compatible components to suit the hose length, available water supply and operating requirements of your chosen product range.

  • 0.53 to 1 bar
  • Match pressure and flow
  • For Startup, Premium and Professional
  • Compatible connection options

Important advice for your hose length

For irrigation runs up to and including 30 metres, a flow restrictor can be useful. For longer runs, we recommend a suitable pressure reducer without an additional fixed flow restrictor, to avoid unnecessarily limiting the water supply. Even on short runs, the permissible operating pressure must not be exceeded: a flow restrictor does not replace a pressure reducer where one is required. Follow the product-specific operating instructions.

Compare pressure reducers, choose fittings and plan installation

Compare the three pressure reducer options

  • 1 bar (15 PSI, product designation): combines a pressure reducer with a 125 µm stainless steel filter element. This version has a pressure relief opening. The filter set is offered for longer irrigation runs of 50 metres or more and must suit the selected soaker hose and its operating requirements.
  • 0.69 bar (10 PSI, product designation): pressure reducer without a water discharge opening, for controlled pressure regulation with a suitable water supply. Available as an individual component or with the relevant fittings, depending on the product.
  • 0.53 bar (8 PSI, product designation): pressure reducer for a lower outlet pressure. Water may discharge from the version with a pressure relief opening. Check the required operating pressure and available flow.

Choose the right regulation components

  • Pressure reducers: lower the supply pressure to the intended outlet pressure. Check the permissible inlet pressure, flow capacity and requirements of your soaker hose.
  • Flow-restricting fittings: quick hose connectors, tap connectors or couplings with fixed flow restriction can be suitable for shorter runs, depending on the version.
  • Control valves and distributors: allow adjustment of the water supply to individual irrigation zones. For multiple runs, ensure a suitable supply or operate the zones in sequence.
  • Connections: choose compatible threads and fittings for your 1/2 inch quick-connect system. The fittings supplied vary between pressure reducer models.

Combine filtration and pressure regulation: a suitable water filter traps dirt particles and helps prevent blockages in the hose pores. Clean the filter regularly. A pressure reducer cannot compensate for insufficient supply pressure or inadequate water flow.

Installation advice: observe the flow direction and permissible inlet pressure of the selected product. Keep any pressure relief openings unobstructed. If water continues to discharge, check the supply in accordance with the product instructions. Check water distribution along the run before installing the hose underground. The CS Pressureless Soaker Hose has its own operating requirements.



Items 1 - 42 of 42